1100度大口径石英管式炉

Voltage

电压

·Voltage rated:AC208-240V 50/60HZ

·额定电压：AC208-240V 50/60HZ

Working Temperature

工作温度

·Max. Temperature: 1100°C ( 1 hr)

最高温度：1100℃ (1小时)

·Continuous working temperature:≤1000℃

持续工作温度：≤1000℃

·Recommended heating Rate:≤10°C /min

推荐升温速率：≤10℃/分钟

Temperature Controller

控温方式

·PID automatic control and auto-tune function.

模糊PID控制和自整定调节

·30 programmable segments for precise thermal processing.

智能化30段可编程控制

·Built-in protection for the over-heated and broken thermocouple.

超温和断偶报警功能

Length of heating zone

加热区长度

·300+300+300mm

Length of constant zone

恒温区长度

·150+200+150mm

Heating Elements

加热元件

·Resistance wire, Fe-Cr-Al Alloy doped by Mo

·电阻丝（掺钼铁铬铝合金）

Temperature Accuracy

控温精度

+/- 1°C

Dimensions

尺寸

·Tube size: Φ150/210/280*1300mm (optional)

·炉管尺寸：Φ150/210/280*1300mm (可选)

·Overall size: 1300*650*1000mm

·外形尺寸：1300*650*1000mm

·Two fibrous ceramic tube blocks are included for blocking heat radiation generated from tube center. (Ceramic blocks must be fully inserted into the furnace chamber before heating).

·两个氧化铝管堵阻挡管中心产生的热辐射（氧化铝管堵必须在加热前塞进炉膛）

Vacuum Flange

真空法兰

·One end is KF25 quick clamp flange

一端为KF25快速卡箍法兰

·Another end is screw tighten flange with gas inlet

另一端为进气螺丝紧固法兰

Vacuum Pressure

真空压力

·10^-1pa can be achieved by mechanical pump

机械泵可达10^-1pa

·10^-3pa can be reached by molecular pump

分子泵可达10^-3pa

Net Weight

净重

250kg

Warranty

质保

One year limited warranty with lifetime support(Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty)

一年质保终身支持（消耗品如炉管，石英管堵，O型圈等不在质保范围内）

Warning

注意事项

·Toxic or explosive gasses are not recommended for use with this furnace without necessary safety controls and supervision. Please put furnace into fume hood for better safety

·没有安全控制和监督的情况下，不建议使用有毒或爆炸性气体。为了安全，请把炉子放在通风处。

·Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.

·在使用过程中炉膛表面可能出现细小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复。

Compliance

认证

·CE Certified

CE认证